Squonk Pins for the CSMNT deck are available now! What this means is for all of you that are running a squonk mod, you will be able to use this accessory to drip juice from the bottom up. Convenience 🔥. Contact your sales rep for purchase options.

Here's the lowdown on Squonk pins, for the uninitiated 😉:

Let's start with the basics, in order to use this accessory you need to have a mod that's capable of housing a juice reservoir internally. (Shown Below)

1. Remove the positive pin on the atomizer and replace it with the pin that has a hollow thread. (The new pin connects to the mod that feeds directly into the juice reservoir.)

2. While the pin is removed, replace the original post with the new one included in your kit. (This post has channels for the juice to flow out from.)

3. Reassemble in reverse order.

4. Squeeze Juice from the reservoir into the atomizer. (Make sure that the build is saturated with enough liquid but be careful not to overfill, unless you enjoy spitback 😂.)

5. Blow some clouds.

The convenience of having a tank with the benefits of dripping directly onto the coil. A win-win situation for vape aficionados.